A chemo-damage-transport model for chloride ions diffusion in cement-based materials: Combined effects of sulfate attack and temperature

The corrosion process of concrete usually accompanies pH changes of the pore solution. Thus, monitoring the pH value of concrete has great significance for the prediction of concrete corrosion. However, the most commonly used methods for measuring the pH value of concrete pore solution are destructive methods, which are very inefficient and cannot provide the pH value for real-time. In this study, an all-solid-state pH sensor constituted with iridium oxide (IrOx) working electrode and manganese/manganese dioxide (Mn/MnO2) reference electrode was developed. The IrOx electrode fabricated with carbonate melt oxidation method and Mn/MnO2 fabricated with powder compaction method exhibited a dense and homogeneous micro structure. The as-prepared pH sensors showed remarkable long-term stability, ideal potential-pH response, low hysteresis, fast pH response time and strong resistance to ionic interference in solutions. Furthermore, the pH sensor was embedded in the mortar samples and used to monitor pH changes during the accelerated carbonation test. The results indicate that the pH sensor can provide accurate pH value variations of the mortar samples during the carbonation process, and it has great potential for non-destructively monitoring the corrosion process of concrete. 

All-solid-state, long term stable, and embedded pH sensor for corrosion monitoring of concrete

In this work, the morphology, chemical constitution, and pH sensing performance of IrO x electrode prepared by cyclic voltammetry (hydrous) and thermal oxidation (anhydrous) are investigated. The results suggest that, IrO x film prepared by the electrochemical method consists of Ir(III) and Ir(IV). A hydration treatment of 30 days is required to establish a super-Nernstian response to pH (67 mV/pH). IrO x film prepared by thermal oxidation has a stronger adhesion with the substrate and consists of Ir(III), Ir(IV) and Ir(VI). A more thorough hydration of 60 days is required to establish a Nernstian response to pH (59 mV/pH). The pH sensing mechanism of both electrodes is discussed and their respective application field is recommended.

Performance of IrOx pH Sensor Prepared by Electrochemical and Thermal Oxidation

pH measurement has received extensive attention from researchers in numerous fields including medical diagnostics agriculture, food industry, marine, and chemical engineering. Owing to their electrode stability, drift degree, and preparation process, iridium/iridium oxide electrodes are considered as the most promising candidate for pH detection under these conditions. In this study, iridium/iridium oxide electrodes were fabricated by thermal cycling oxidation method. The relationship between the electrode structure and performance was investigated and discussed. To study the influence of supercritical treatment, the as-prepared electrodes were treated at 35 MPa and 400 °C for 3 h. After examining their pH response, the supercritically treated electrodes exhibit better performance than the untreated iridium/iridium oxide electrodes. The structural changes of the treated electrodes were investigated by Raman spectroscopy, X-ray photoelectron spectroscopy, cyclic voltammograms and scanning electron microscopy. The results revealed the important changes in the iridium oxide film of the electrode after supercritical treatment, such as its morphology, chemical bond, valence state, and defects, which collaborated to achieve its improved performance. 

Improved Iridium/Iridium Oxide pH Electrode through Supercritical Treatment

This letter investigates the use of external voltage resets to reduce drifting issues of iridium oxide (IrO x ) pH-sensing films. Two types of IrO x films prepared by sol–gel and electroplating techniques were examined comparing hydrous and anhydrous material characteristics. The thin-film IrO x allows inexpensive processing for flexible polyimide substrates enabling planar and monolithic integration for wearables and miniature pH sensors. Open-circuit potential drifts and external voltage resets were investigated for freshly prepared electrodes and retested after 14 days. External resets were examined at different voltage levels. Sol–gel electrodes showed 57% and 81% drift improvement in acid and alkaline test solutions, respectively, while electroplated ones showed 84% and 88% improvement. Sensitivity and hysteresis were investigated after external resets and showed promising results. A total of 15 sol–gel and 15 electroplated electrodes were characterized. Differences in pH characteristics are attributed to different types of IrO x compositions. The quicker response transitions and reduced potential drifts will enable reliable long-term pH monitoring and reduce frequent calibration for pH-sensing applications.

Improvement on Potential Drifting for Sol–Gel and Electroplated Iridium Oxide-Based pH-Sensing Films

Iridium oxide pH electrodes employing the carbonate melt oxidation method were fabricated with oxidation temperatures of 750 °C, 800 °C and 850 °C, respectively. Scanning electron microscope (SEM) and atomic force microscope (AFM) images showed that the oxide film regularized with the increase in oxidation temperatures. The pH response, response time and long-term stability of the electrodes indicated that the electrodes made at 850 °C had the best performance. X-ray photoelectron spectra (XPS) surveys investigated the change in the electrodes' chemical composition and element oxidation states at 850 °C, and the results showed that the relative content of Ir3+ had increased by 23.9%, and the Ir4+ and Ir6+ had decreased by 10.9% and 13%, respectively, in the surface oxide layer after one month of aging. However, the relative contents of Ir3+, Ir4+ and Ir6+ were almost constant for the inner oxide layer. Meanwhile, the XPS result also indicated that the outer oxide layer of the electrode had a higher hydration degree than the inner oxide layer.

https://www.mdpi.com/1424-8220/19/21/4756/pdf

Effect of Oxidization Temperatures and Aging on Performance of Carbonate Melt Oxidized Iridium Oxide pH Electrode.

Handle everyday research tasks with reliable, citation-backed results

Your personal Research Agent to handle research tasks with citation-backed results

Popular Tasks used by Researchers

How can I help with your research?

Meet SciSpace

Get more enhanced response by uploading the PDFs you want me to reference.

No relevant PDFs in your library

SciSpace is the AI research assistant for academics. Run systematic literature reviews on 280M+ papers, and write papers with cited sources. Trusted by 1M+ students, PhDs & researchers.

SciSpace | AI for Research

Analyze PDFs

Code & Manuscripts

Funding & Grants

Literature & Patents

Medical & Clinical Data

Systematic Review

Visualize & Present

Web & Data

Build a Google Scholar-like website for your research.

Build a website

Create charts and images for your research

Create a Chart

Write a paper for submission to a journal

Draft a manuscript

Patent Search

Design eye-catching scientific posters in minutes.

Scientific Poster Generation

Systematic Literature Review

One task is running at the moment. Your messages will be shown right after.

Drag and drop or click here to browse

Loved by <highlight>1 million+</highlight> researchers

Extract a list of specific topics and their sources from unstructured text

Topics

Compare and analyze relevant papers that matches with your search

Papers

Get insights from PDFs and bookmarked papers from your library

My library

Recent searches

Try searching for:

Catch AI-generated content in scholarly and non-scholarly content

{ai} Detector

Ai Writer

Get PDF Summaries, highlighted text explanations 

Chat with PDF

Effortlessly create in-text citations and bibliographies in APA and 2,500 other formats

Citation generator

Get explanations, summaries, and answers on academic papers

Ease up your research workflow with {scispace}'s cohort of exciting AI tools

Elevate your academic writing skills and convey your ideas the way you want

Paraphraser

Explore our range of reading and writing tools

Your file is being prepared and should be ready in a few minutes. If it's a large file, it might take a bit longer. You can close this window, and we'll email you the file when it's done.

You have reached a maximum limit of {limit} columns in the table. Remove at least 1 column to add or create another one.

Biqin Dong

Author Tools

Chat about Author

Papers

Effect of Oxidization Temperatures and Aging on Performance of Carbonate Melt Oxidized Iridium Oxide pH Electrode.