18 Papers
48 Citations
Atanu Saha is an academic researcher from Central Mechanical Engineering Research Institute. The author has contributed to research in topics: Cementite & Pearlite. The author has an hindex of 8, co-authored 18 publications.
Chat about Author
Papers
Effect of cyclic heat treatment on microstructure and mechanical properties of 0.6wt% carbon steel
TL;DR: In this article, an annealed 0.6-wt% carbon steel was subjected to cyclic heat treatment process that consisted of repeated short-duration (6min) holding at 810°C (above Ac3 temperature) followed by forced air cooling.
89
Microstructural modifications and changes in mechanical properties during cyclic heat treatment of 0.16% carbon steel
TL;DR: In this article, an annealed 0.16% carbon steel was subjected to cyclic heat treatment process that consisted of repeated short-duration (6min) holding at 910°C (above Ac 3 temperature) followed by forced air cooling.
53
Development of high strength ductile hypereutectoid steel by cyclic heat treatment process
TL;DR: In this article, a homogenizing annealed 1.24-wt% carbon steel was subjected to cyclic heat treatment process that consisted of repeated short-duration (6min) holding at 894°C (above Acm temperature) followed by forced air cooling.
41
An Alternate Approach to Accelerated Spheroidization in Steel by Cyclic Annealing
TL;DR: In this article, an annealed 0.6-wt. carbon steel was subjected to cyclic heat treatment process that consisted of repeated short-duration (6min) holding at 810°C (above Ac3 temperature) followed by cooling in a flowing air medium (flow rate: 6m3/h).
38
Mechanism of accelerated spheroidization of steel during cyclic heat treatment around the upper critical temperature
TL;DR: In this article, an investigation was carried out on the mechanism of accelerated spheroidization in 0.6 wt. carbon steel under cyclic heat treatment involving repeated short duration holdings above its upper critical temperature (A 3) followed by forced air cooling.
30