Natural bone tissue is composed of calcium-deficient carbonated hydroxyapatite as the inorganic phase and collagen type I as the main organic phase. The biomimetic approach of scaffold development for bone tissue engineering application is focused on mimicking complex bone characteristics. Calcium phosphates are used in numerous studies as bioactive phases to mimic natural bone mineral. In order to mimic the organic phase, synthetic (e.g., poly(ε-caprolactone), polylactic acid, poly(lactide-co-glycolide acid)) and natural (e.g., alginate, chitosan, collagen, gelatin, silk) biodegradable polymers are used. However, as materials obtained from natural sources are accepted better by the human organism, natural polymers have attracted increasing attention. Over the last three decades, chitosan was extensively studied as a natural polymer suitable for biomimetic scaffold development for bone tissue engineering applications. Different types of chitosan-based biomaterials (e.g., molded macroporous, fiber-based, hydrogel, microspheres and 3D-printed) with specific properties for different regenerative applications were developed due to chitosan’s unique properties. This review summarizes the state-of-the-art of biomaterials for bone regeneration and relevant studies on chitosan-based materials and composites.

/pdf/chitosan-based-biomaterials-for-bone-tissue-engineering-34iop42o.pdf

Chitosan-Based Biomaterials for Bone Tissue Engineering Applications: A Short Review

Perovskite oxides as active materials in novel alternatives to well-known technologies: A review

3D printing of PCL/nano-hydroxyapatite scaffolds derived from biogenic sources for bone tissue engineering

Titanium and its alloys are widely used as implant materials for biomedical devices owing to their high mechanical strength, biocompatibility, and corrosion resistance. However, there is a significant rise in implant-associated infections (IAIs) leading to revision surgeries, which are more complicated than the original replacement surgery. To reduce the risk of infections, numerous antibacterial agents, e.g., bioactive compounds, metal ions, nanoparticles, antimicrobial peptides, polymers, etc., have been incorporated on the surface of the titanium implant. Various coating methods and surface modification techniques, e.g., micro-arc oxidation (MAO), layer-by-layer (LbL) assembly, plasma electrolytic oxidation (PEO), anodization, magnetron sputtering, and spin coating, are exploited in the race to create a biocompatible, antibacterial titanium implant surface that can simultaneously promote tissue integration around the implant. The nature and surface morphology of implant coatings play an important role in bacterial inhibition and drug delivery. Surface modification of titanium implants with nanostructured materials, such as titanium nanotubes, enhances bone regeneration. Antimicrobial peptides loaded with antibiotics help to achieve sustained drug release and reduce the risk of antibiotic resistance. Additive manufacturing of patient-specific porous titanium implants will have a clear future direction in the development of antimicrobial titanium implants. In this review, a brief overview of the different types of coatings that are used to prevent implant-associated infections and the applications of 3D printing in the development of antibacterial titanium implants is presented.

https://www.mdpi.com/2079-6382/11/12/1719/pdf?version=1669886599

Antibacterial Coatings for Titanium Implants: Recent Trends and Future Perspectives

Inorganic biomaterials, including different types of metals and ceramics are widely used in various fields due to their biocompatibility, bioactivity, and bioresorbable capacity. In recent years, biomaterials have been used in biomedical and biological applications. Calcium phosphate (CaPs) compounds are gaining importance in the field of biomaterials used as a standalone material or in more complex structures, especially for bone substitutes and drug delivery systems. The use of multiple dopants into the structure of CaPs compounds can significantly improve their in vivo and in vitro activity. Among the general information included in the Introduction section, in the first section of this review paper, the authors provided a background on the development of hydroxyapatite, methods of synthesis, and its applications. The advantages of using different ions and co-ions for substitution into the hydroxyapatite lattice and their influence on physicochemical, antibacterial, and biological properties of hydroxyapatite are also presented in this section of the review paper. Larry Hench’s 45S5 Bioglass®, commercially named 45S5, was the first bioactive glass that revealed a chemical bond with bone, highlighting the potential of this biomaterial to be widely used in biomedicine for bone regeneration. The second section of this article is focused on the development and current products based on 45S5 Bioglass®, covering the historical evolution, importance of the sintering method, hybrid bioglass composites, and applications. To overcome the limitations of the original biomaterials, studies were performed to combine hydroxyapatite and 45S5 Bioglass® into new composites used for their high bioactivity and improved properties. This particular type of combined hydroxyapatite/bioglass biomaterial is discussed in the last section of this review paper.

/pdf/current-development-in-biomaterials-hydroxyapatite-and-1okhr20j.pdf

Current Development in Biomaterials—Hydroxyapatite and Bioglass for Applications in Biomedical Field: A Review

Biological apatites are characterised by various ionic substitutions within the HAp lattice that are crucial for bone metabolism. The introduction of key role elements within synthetic calcium phosphates (CaP), mainly hydroxyapatite (HAp), can increase osteogenesis and enhance bone regeneration process. The lattice structure of HAp enables cationic and anionic substitutions leading to the enhanced biological performance of synthetic bone graft materials. This review summarises recent and relevant studies on cationic and anionic substitutions in the HAp lattice that are commonly found in the human body. Furthermore, co-substituted HAp obtained from synthetic and biological precursors, along with their influence on the bone regeneration process, has been discussed. Finally, future perspectives for the use of substituted HAp have been presented.

Ionic substituted hydroxyapatite for bone regeneration applications: A review

Evaluation of carbonate precursors in manganite coprecipitation synthesis by Fourier transform infrared (FTIR) spectroscopy

Strontium and lanthanum manganites are nowadays the subject of extensive research because of their promising electrical and magnetic properties. Strontium manganite, SrMnO3, was successfully prepared by citrate-nitrate autocombustion (CNA) and by the coprecipitation method. These methods were then applied to synthesis of strontium doped lanthanum manganites, La1-xSrxMnO3 (x ​= ​0, 0.1, 0.2 and 0.3). The optimal phase formation conditions were determined by thermogravimetry and differential scanning calorimetry. Crystallization of precursors and calcined powders was studied by X-ray diffraction. Powders, in which pure manganite phase was obtained, were also analyzed by permanganate titration with Mohr’s salt in order to determine oxygen nonstoichiometry. Oxygen stoichiometry was achieved in SrMnO3 powders obtained by the CNA method and calcined at 1000 ​°C as well as in powders obtained by the coprecipitation method and calcined at 1200 ​°C. La1-xSrxMnO3 phase was oxygen stoichiometric for x ​= ​0.3 while decreasing of x resulted in cation deficiency, i.e. oxygen excess. Oxygen deficit was achieved for x ​= ​0.09 upon calcination at 1200 ​°C. The obtained results were confirmed by thermogravimetry and the Rietveld refinement analysis.

Permanganometric determination of oxygen nonstoichiometry in manganites

Chitosan/collagen/Mg, Se, Sr, Zn-substituted calcium phosphate scaffolds for bone tissue engineering applications: A growth factor free approach

Handle everyday research tasks with reliable, citation-backed results

Your personal Research Agent to handle research tasks with citation-backed results

Popular Tasks used by Researchers

How can I help with your research?

Meet SciSpace

Get more enhanced response by uploading the PDFs you want me to reference.

No relevant PDFs in your library

SciSpace is the AI research assistant for academics. Run systematic literature reviews on 280M+ papers, and write papers with cited sources. Trusted by 1M+ students, PhDs & researchers.

SciSpace | AI for Research

Analyze PDFs

Code & Manuscripts

Funding & Grants

Literature & Patents

Medical & Clinical Data

Systematic Review

Visualize & Present

Web & Data

Build a Google Scholar-like website for your research.

Build a website

Create charts and images for your research

Create a Chart

Write a paper for submission to a journal

Draft a manuscript

Patent Search

Design eye-catching scientific posters in minutes.

Scientific Poster Generation

Systematic Literature Review

One task is running at the moment. Your messages will be shown right after.

Drag and drop or click here to browse

Loved by <highlight>1 million+</highlight> researchers

Extract a list of specific topics and their sources from unstructured text

Topics

Compare and analyze relevant papers that matches with your search

Papers

Get insights from PDFs and bookmarked papers from your library

My library

Recent searches

Try searching for:

Catch AI-generated content in scholarly and non-scholarly content

{ai} Detector

Ai Writer

Get PDF Summaries, highlighted text explanations 

Chat with PDF

Effortlessly create in-text citations and bibliographies in APA and 2,500 other formats

Citation generator

Get explanations, summaries, and answers on academic papers

Ease up your research workflow with {scispace}'s cohort of exciting AI tools

Elevate your academic writing skills and convey your ideas the way you want

Paraphraser

Explore our range of reading and writing tools

Your file is being prepared and should be ready in a few minutes. If it's a large file, it might take a bit longer. You can close this window, and we'll email you the file when it's done.

You have reached a maximum limit of <strong>{limit}</strong> columns in the table. Remove at least <strong>1</strong> column to add or create another one.

Andreja Žužić

Author Tools

Chat about Author