Selective laser-melted (SLM) Ti-6Al-4V alloy was quasi-statically compressed in the transverse and longitudinal directions at a strain rate of 1 × 10−3 s−1 at room temperature. The twinning, in-grain misorientation axis (IGMA) distribution and active slip modes of individual grains in the deformed SLM Ti-6Al-4V alloy were studied in detail via transmission Kikuchi diffraction (TKD) and transmission electron microscopy (TEM). The α’/α phase was textured with the c-axis oriented either at ~45° or perpendicular to the building direction (BD). A combined analysis of the IGMA distribution and Schmid factor revealed that the prismatic &lt;a&gt; slip or pyramidal slip was easily activated in the soft grains with their c-axes perpendicular to the BD (or the loading direction) in the longitudinal compressed sample, while slip was hardly activated in the transverse compressed sample due to the lack of soft grains. Prismatic &lt;a&gt; slip with IGMA around &lt;0001&gt; Taylor axis also occurred in {10–11} twins. The observations revealed that the prismatic &lt;a&gt; slip played a key role in accommodating the external strain and, thus, well explained the anisotropy of mechanical properties in the SLM Ti-6Al-4V alloy. 

/pdf/active-slip-mode-analysis-of-an-additively-manufactured-ti-3jxz2l31.pdf

Active Slip Mode Analysis of an Additively Manufactured Ti-6Al-4V Alloy via In-Grain Misorientation Axis Distribution

Research on the generation and control of high-order flatness during the controlling of titanium strip profile by the intermediate taper roll in a 20-high mill

High-throughput ab initio calculations were employed to study the lattice reorientation process accompanying twinning under plastic deformation in hexagonal metals, as well as in alloyed Mg and Ti. The results indicate that, in unalloyed hexagonal metals, reorientation consumes the highest and lowest energies in Be and Mg, respectively, with intermediate energies in Sc, Co, Ti, Zr and Dy. The shuffle component always contributes a significant part of the reorientation energy in Mg, whereas in Ti with sufficient shear strain, subsequent reorientation process becomes energy downhill. In alloyed Mg and Ti, appropriate alloying significantly reduces the reorientation energy, and especially in alloyed Ti, there is significant negative correlation between the reorientation energy and certain properties of the alloying elements. The results are consistent with the fact that reorientation has been experimentally observed in compressed Mg nanopillars, but only in atomic scale simulations under high strain rate in Ti. 

First-principles investigation on twin-related lattice reorientation in hexagonal metals and alloys

&lt;p&gt;Selective laser-melted (SLM) Ti-6Al-4V alloy was quasi-statically compressed in the transverse and longitudinal directions at a strain rate of 1 × 10−3 s−1 at room temperature. The twinning, in-grain misorientation axis (IGMA) distribution and active slip modes of individual grains in the deformed SLM Ti-6Al-4V alloy were studied in detail via transmission Kikuchi diffraction (TKD) and transmission electron microscopy (TEM). The α’/α phase was textured with the c-axis oriented either at ~45° or perpendicular to the building direction (BD). A combined analysis of the IGMA distribution and Schmid factor revealed that the prismatic &lt;a&gt; slip or pyramidal slip was easily activated in the soft grains with their c-axes perpendicular to the BD (or the loading direction) in the longitudinal compressed sample, while slip was hardly activated in the transverse compressed sample due to the lack of soft grains. Prismatic &lt;/a&gt;&lt;a&gt; slip with IGMA around &lt;0001&gt; Taylor axis also occurred in {10–11} twins. The observations revealed that the prismatic &lt;/a&gt;&lt;a&gt; slip played a key role in accommodating the external strain and, thus, well explained the anisotropy of mechanical properties in the SLM Ti-6Al-4V alloy.&lt;/a&gt;&lt;/p&gt; 

pdf/active-slip-mode-analysis-of-an-additively-manufactured-ti-2721f3po8g.pdf

pdf/active-slip-mode-analysis-of-an-additively-manufactured-ti-2cbc71lzf9.pdf

The mechanical response of a bi-crystal model with a 90° grain boundary under external compressive and tensile loading parallel to the boundary plane normal was investigated with molecular dynamics simulations The grain boundary was found to migrate along two opposite directions upon compressive and tensile straining, with the formation of inter-connected coherent twin boundary and basal/prismatic boundary The atomic details of such grain boundary migration were unraveled, which indicated the role of interface dislocations The temperature effect was also discussed

Uniaxial Strain-Induced Grain Boundary Migration in Titanium

Handle everyday research tasks with reliable, citation-backed results

Your personal Research Agent to handle research tasks with citation-backed results

Popular Tasks used by Researchers

How can I help with your research?

Meet SciSpace

Get more enhanced response by uploading the PDFs you want me to reference.

No relevant PDFs in your library

SciSpace is the AI research assistant for academics. Run systematic literature reviews on 280M+ papers, and write papers with cited sources. Trusted by 1M+ students, PhDs & researchers.

SciSpace | AI for Research

Analyze PDFs

Code & Manuscripts

Funding & Grants

Literature & Patents

Medical & Clinical Data

Systematic Review

Visualize & Present

Web & Data

Build a Google Scholar-like website for your research.

Build a website

Create charts and images for your research

Create a Chart

Write a paper for submission to a journal

Draft a manuscript

Patent Search

Design eye-catching scientific posters in minutes.

Scientific Poster Generation

Systematic Literature Review

One task is running at the moment. Your messages will be shown right after.

Drag and drop or click here to browse

Loved by <highlight>1 million+</highlight> researchers

Extract a list of specific topics and their sources from unstructured text

Topics

Compare and analyze relevant papers that matches with your search

Papers

Get insights from PDFs and bookmarked papers from your library

My library

Recent searches

Try searching for:

Catch AI-generated content in scholarly and non-scholarly content

{ai} Detector

Ai Writer

Get PDF Summaries, highlighted text explanations 

Chat with PDF

Effortlessly create in-text citations and bibliographies in APA and 2,500 other formats

Citation generator

Get explanations, summaries, and answers on academic papers

Ease up your research workflow with {scispace}'s cohort of exciting AI tools

Elevate your academic writing skills and convey your ideas the way you want

Paraphraser

Explore our range of reading and writing tools

Your file is being prepared and should be ready in a few minutes. If it's a large file, it might take a bit longer. You can close this window, and we'll email you the file when it's done.

You have reached a maximum limit of <strong>{limit}</strong> columns in the table. Remove at least <strong>1</strong> column to add or create another one.

Aidong Tu

Author Tools

Chat about Author

Papers

Uniaxial Strain-Induced Grain Boundary Migration in Titanium