This paper describes a variety of experiments that reveal the potential application of impedance spectroscopy (IS) measurements to enhance performance of ultrathin polyaniline (PANI)-based films on flexible substrate to control ammonia gas exposure in the 0–20 ppm range. Further, the device is mechanically robust for making electrical contact without lithography. We have employed the IS technique to proper adjust the optimal operation frequency of an easy-to-process, inexpensive and user-friendly PANI-based resistometric detectors in which drift current and delay problems related to electrode effects and dielectric absorption of PANI are insignificant. These requirements place emphasis upon the material and device configuration, and the range of frequencies from 10 to 100 Hz corresponds to the ideal working region to operate the device to unify sensibility inside 5%, reproducibility, linearity, stability and low response time (

/pdf/ammonia-gas-sensor-based-on-the-frequency-dependent-3mtv7v3972.pdf

Ammonia gas sensor based on the frequency-dependent impedance characteristics of ultrathin polyaniline films

In the present work, we concentrate on the study of effects of metallic electrodes, multilayer thickness and temperature in ac and dc electrical conductivity of polyaniline/poly(vinyl sulfonic acid) (PANI/PVS) ultrathin films. The polymer system was obtained from layer-by-layer (Lbl) self-assembly technique on a glass substrate with an electrode array of adhesion layer of NiCr (20 nm) covered with Au (180 nm). We observed a significant and abrupt increase in the value of dc conductivity and a change of ac conductivity behavior of NiCr/Au–PANI/PVS–NiCr/Au structure when the thickness of PANI/PVS system reaches the Au layer. These effects were ascribed to the ideal contact of Au–PANI/PVS and the relative high interfacial contact resistance between PANI/PVS and NiCr, thus reducing the parallel resistance of NiCr/Au–PANI/PVS interfacial layer in an ideal parallel plate capacitor structure. Atomic Force Microscopy images confirm this assumption. Furthermore, the ac conductivity of Au–PANI/PVS–Au structure was typical of solid disordered materials. A model based on carrier hopping in a medium with randomly varying energy barriers was presented for the ac conductivity of the polymer system, which also encompasses the high dielectric constant of PANI/PVS blended films, the neutral contact Au–PANI/PVS, and the electrical resistance of NiCr–PANI/PVS interfacial layer. The model allowed separating the interface and the bulk effects in the electrical response of NiCr/Au–PANI/PVS–NiCr/Au structure and in addition the highest activation energy (35 MeV) correlated with an optimization of hopping distance (30 nm) for carriers jumps in PANI/PVS system.

/pdf/influence-of-nicr-au-electrodes-and-multilayer-thickness-on-3gow6zam7l.pdf

Influence of NiCr/Au electrodes and multilayer thickness on the electrical properties of PANI/PVS ultrathin film grown by Lbl deposition

The application of cashew gum, in particular the one which is abundant in northeastern Brazil, remains limited to the foods and pharmaceutics industry. In attempting to obtain further potentialities of the cashew gum (CG), its electrical applicability needs to be explored. To this end, the CG is incorporated in blends based on PANI to make an innovative thin self-sustainable blend films (PACG) comprising PANI and CG. The blend films were fabricated by adding the CG in the synthesis process of the polyaniline, and they were prepared by the standard “casting” method. The film materials were blending in three different weight ratios (99:1), (95:5) and (80:20). We also fabricated the only PANI film. As PANI has its conductivity enhanced by doping process, the blends and PANI films were doped by using sulfuric acid at 0.05 and 0.1 mol L−1 concentrations. The characterization of the films was carried out by FTIR spectroscopy, thermal analyses and electrical measurements. The FTIR results exhibited the occurrence of a weak and secondary chemical interaction between PANI and CG. Once there was no appearance of new bands, the profile of the FTIR curves was maintained for the blends and no significant shifts were identified for the maximum frequency of bands. The thermal analysis measurements revealed alteration at the thermal stability temperature of blends due to the doping process and indicated that the thermal profile of the constituent materials (PANI and CG) was preserved in the blends. The electrical studies showed that the undoped blend films exhibited a low level of conductivity as the amount of gum increased. On the other hand, the doped films reached a high level of conductivity in comparison with PANI films and the more the amount of CG in the blend the more is its conductivity. For PACG with 20% of gum, σ increased by a factor of 106, whereas in PANI film, it increased by 104 at the 0.1 mol L−1 doped level. These results point to the possibility of using this sort of blend based on polyaniline and cashew gum as an innovative conductive polymer once it exhibits acceptable electrical, structural and thermal properties.

Electrical, structural and thermal properties of new conductive blends (PANICG) based on polyaniline and cashew gum for organic electronic

https://iopscience.iop.org/article/10.35848/1347-4065/ab7413/pdf

Gas adsorption effects on electrical properties of amorphous In2O3 thin-film transistors under various environments

Ultrasensitive strain sensors have significant practical application in human-motion detection. However, there is still a challenge for developing strain sensors that are capable of detecting high strain and a high gauge factor (GF). The aim of this study was to investigate whether a semiconducting polymer and AC measurements are able to improve the GF of stretchable sensors. We employed complex impedance spectroscopy measurements to adjust the optimal operating frequency and the impedance component for improving the device performance of a polyaniline film on a flexible poly(vinyl chloride):diisononyl phthalate sub-strate. In the DC regime, the sensor revealed linearity and GF ∼18 at 46% strain. oreover, the frequency of 100 Hz corresponds to the ideal work re- gion to operate the device that unifies sensitivity and linearity, as well as to directly correlate GF and Z∗(100) data. The most surprising correlation is with GF from Z”(100), i.e. GF”(100), which is about 9 times higher than GF (DC regime) at 46% strain. The Cole-Davidson approach is developed, in which Z’(f) and Z”(f) are calculated as functions of tensile stress. This model provides the correlation between GF”(100) and the electrical resistance and capacitance of the device, as well as the charge-carrier hopping distance dependence on the tensile stress.

The use of complex impedance spectroscopy measurements for improving strain sensor performance

This paper describes a new approach to improve the analysis of surface modification of free-standing semiconducting polymer films emerged from the interfacial interaction between aluminium electrode and HCl-doped polyaniline (PANI) films. The Al–PANI–Al structure was prepared by casting PANI/N-methyl-2-pirrolidone onto a glass substrate and then being sandwiched between Al electrodes after immersion in HCl aqueous solutions and then dried. The Al–polymer interface was investigated by means of complex impedance spectroscopy in the frequency domain on HCl-doped PANI films. The dc conductivity of the interfacial layer between the Al and PANI surface exposed to air during the film processing is higher than those obtained with Al and PANI surface exposed to glass. Raman spectroscopy data confirm this evidence. Here, it is speculated that some dissociated chlorine and aluminium-salt-containing species have contributed as ionic carriers increasing the electrical conductivity of the polymer bulk, and by the formation of an Al2O3 thin layer between the Al and PANI films. An equivalent circuit model considering the influence of Al–PANI reactions on the electrical behaviour of the Al–PANI–Al structure was proposed. Additionally, it was demonstrated that the impedance spectroscopy facilitates the identification of interface modification in the Al–PANI–Al films.

Analysis of the Al-PANI interfaces by complex impedance spectroscopy

Differential capacitive response of poly (3-hexylthiophene) diodes and effects of air exposure

Handle everyday research tasks with reliable, citation-backed results

Your personal Research Agent to handle research tasks with citation-backed results

Popular Tasks used by Researchers

How can I help with your research?

Meet SciSpace

Get more enhanced response by uploading the PDFs you want me to reference.

No relevant PDFs in your library

SciSpace is the AI research assistant for academics. Run systematic literature reviews on 280M+ papers, and write papers with cited sources. Trusted by 1M+ students, PhDs & researchers.

SciSpace | AI for Research

Analyze PDFs

Code & Manuscripts

Funding & Grants

Literature & Patents

Medical & Clinical Data

Systematic Review

Visualize & Present

Web & Data

Build a Google Scholar-like website for your research.

Build a website

Create charts and images for your research

Create a Chart

Write a paper for submission to a journal

Draft a manuscript

Patent Search

Design eye-catching scientific posters in minutes.

Scientific Poster Generation

Systematic Literature Review

One task is running at the moment. Your messages will be shown right after.

Drag and drop or click here to browse

Loved by <highlight>1 million+</highlight> researchers

Extract a list of specific topics and their sources from unstructured text

Topics

Compare and analyze relevant papers that matches with your search

Papers

Get insights from PDFs and bookmarked papers from your library

My library

Recent searches

Try searching for:

Catch AI-generated content in scholarly and non-scholarly content

{ai} Detector

Ai Writer

Get PDF Summaries, highlighted text explanations 

Chat with PDF

Effortlessly create in-text citations and bibliographies in APA and 2,500 other formats

Citation generator

Get explanations, summaries, and answers on academic papers

Ease up your research workflow with {scispace}'s cohort of exciting AI tools

Elevate your academic writing skills and convey your ideas the way you want

Paraphraser

Explore our range of reading and writing tools

Your file is being prepared and should be ready in a few minutes. If it's a large file, it might take a bit longer. You can close this window, and we'll email you the file when it's done.

You have reached a maximum limit of <strong>{limit}</strong> columns in the table. Remove at least <strong>1</strong> column to add or create another one.

A. C. Maciel

Author Tools

Chat about Author

Papers

Analysis of the Al-PANI interfaces by complex impedance spectroscopy

Differential capacitive response of poly (3-hexylthiophene) diodes and effects of air exposure